Treatment methods for oil leakage of transformer silicon steel sheets
The phenomenon of iron chip oil leakage manifests in different situations, so we should also consider the situation when dealing with it. The fuel injector is a component. If the iron chip is used with unclean diesel or the machine is used for a long time, it will return oil due to wear of the fuel injector.
However, due to the high cost and uneconomical nature of replacing fuel injectors, in order to prevent oil leakage, oil can be directed back to the tank through the return pipe or a diesel filter can be introduced. If the oil return pipe is damaged, a plastic pipe can be used to introduce the oil into a self provided container, filter it, and then pour it back into the oil tank.
Secondly, there is oil leakage in the oil delivery section, which can be handled appropriately according to the situation: if the gasket of the hollow screw in the oil delivery pipe is uneven, the gasket can be removed, ground flat, and then replaced. If the problem still cannot be solved, a new gasket can be replaced, or a thicker soft plastic material can be cut into a gasket and replaced.
The oil leakage at the joint between the plastic oil pipeline and the metal is mostly caused by the hardening or rupture of the plastic oil pipeline. The hardened or ruptured part can be cut off, then softened with hot water, installed on the metal joint while it is still hot, and then tied firmly with metal wire; The metal oil pipeline breaks and leaks oil. The broken part can be welded with copper. In addition, to prevent the oil pipeline from breaking, the curvature should be appropriate when installing the oil pipeline, and the device should not be forcefully pulled. The pipe body should not come into contact with the machine body to prevent wear and tear.
When the valve cover is installed, if the tightening force is too strong, it is easy to deform and leak oil. At this point, the leaking valve cover can be removed, carefully hammered and shaped with a wooden stick to make its contact surface flat, and then a gasket can be placed and installed. There are different ways to deal with oil leakage in different parts of the iron chip. During the treatment process, be careful not to cause damage to the machine.
Article source: Transformer silicon steel sheethttp://www.cheungshun.com
-
08-27
What is the function of the iron core of the silicon steel sheet in a transformer
The commonly used transformer iron core is generally made of silicon steel sheets. Silicon steel is a type of steel containing silicon, with a silicon content of. 0.8%~4.8%. The iron core of a transfo
-
08-27
The difference between hot-rolled and cold-rolled silicon steel sheets for transformers
In daily life, silicon steel sheets are widely used in motor cores. However, in terms of manufacturing silicon steel sheets, there are two aspects: hot rolling and cold rolling. Many friends do not kn
-
08-27
Is it better for silicon steel sheets to have a higher silicon content
The silicon steel sheet manufacturer's answer is not really satisfied with thinner silicon steel cores with higher silicon content. In terms of standards, the silicon content of thinner steel cores do
-
08-27
The difference between silicon steel sheet and silicon steel sheet
silicon steel sheetElectrical silicon steel sheets are commonly known as silicon steel sheets or silicon steel sheets. It is an electrical silicon steel with a silicon content of up to 0.8% -4.8%, mad
Copyright © 2026 Jiangmen Cheungshun Electric Products Factory Co., Ltd. All rights reserved xml site map