Transformer silicon steel sheet, also known as silicon steel sheet. It is a type of silicon iron alloy with particularly low carbon content, generally with a silicon content of 0.5-4.5%, processed by hot and cold rolling. Generally, the thickness is below 1mm, also known as thin plate. Adding silicon can improve the resistivity of iron, reduce iron loss and magnetic aging. Mainly used to make iron cores for transformers, motors, and generators. Most of the silicon steel sheets in Hebei belong to the category of sheet metal, which is an independent branch due to its special use. The following is the processing method for silicon steel sheets:

1. The silicon steel sheet on the dividing spindle of the equipment is then pressed tightly with a pressing head;

2. Punching molds for stator and rotor blades of the equipment, and adjusting their orientation;

3. Every time the orientation of the dividing box is moved, the swing cylinder is activated to punch the slot holes of the stator and rotor of the silicon steel sheet one by one;

4. By scheduling the rolling screw, adjust the distance between the indexing spindle, the fixed core disk, and the punching die;

5. Drive the swing cylinder, rotate the double crank shaft 180 degrees, and reverse the orientation of the two inner sliders up and down. The silicon steel plate punching machine enables the stator and rotor plates of silicon steel plates to be punched into slots on the machine tool in one go, saving auxiliary time, improving productivity, reducing investment, and lowering costs.

Article source: Transformer silicon steel sheethttp://www.cheungshun.com/